Experiments at the W.M. Keck Observatory to support the Thirty Meter Telescope design work

In order to validate various assumptions about the operating environment of the Thirty Meter Telescope (TMT), to validate the modeling packages being used to guide the design work for the TMT and to directly investigate the expected operation of several subsystems we have embarked on an extensive campaign of environmental measurements at the Keck telescopes. We have measured and characterized the vibration environment around the observatory floor and at certain locations on the telescope over a range of operating conditions. Similarly the acoustic environment around the telescope and primary mirror has been characterized for frequencies above 2 Hz. The internal and external wind and temperature fields are being measured using combined sonic anemometer and PRT sensors. We are measuring the telescope position error and drive torque signals in order to investigate the wind induced telescope motions. A scintillometer mounted on the telescope is measuring the optical turbulence inside the telescope tube. This experimental work is supplemented by an extensive analysis of telescope and engineering sensor log files and measurements, primarily those of accelerometers located on the main telescope optics, primary mirror segment edge sensor error signals (residuals), telescope structure temperature measurements and the telescope status information.